VICS Module Error
The vehicle information and communication system (VICS) module has detected an internal error or malfunction. Think of it like a translator that's stopped working—your car's systems can't properly share information with each other.
The ECU monitors the VICS module's operational status, internal processor health, and communication bus integrity. It checks for valid data transmission, processor response times, and memory integrity to ensure the system functions correctly.
| Parameter | Normal Range | Fault Condition |
|---|---|---|
| Module Communication Response | Module responds within 100ms | No response or delayed >500ms |
| Internal Processor Status | Processor executing normally | Processor fault detected or memory checksum failed |
Code B2199 is a low-severity fault. Your vehicle is generally safe to drive to a workshop for diagnosis. However, do not ignore it indefinitely — low-severity codes often indicate developing problems that become expensive if neglected. Book a diagnostic appointment within 2–4 weeks. If you notice any additional symptoms (rough running, power loss, unusual smells), treat it as higher priority.
Once the fault is repaired, B2199 can be cleared using any OBD-II scanner. Connect the scanner, navigate to "Clear Codes" or "Erase DTCs," and confirm. The check engine light turns off immediately.
The code will return if the root cause was not actually fixed. The ECM re-detects the fault within 1–3 drive cycles and sets the code again.